Have you ever wondered why your toilet doesn’t pay off as strong as it used to be?
It could be something as simple as a non -functional flushing valve or accumulation somewhere in plumbing. But don’t worry – before calling an expensive plumber, there are some easy checks and repairs that you can do yourself.
Here is a quick guide to help you solve weak flushing and slow problems with drainage without breaking the bank. Read further to find out what could cause the problem and how to fix it effectively.
How to fix a weak flushing of toilet and prevent future problems
If your toilet flushes and lacks suction, you can take some simple steps to avoid spending money on the plumber.
Check the impulse of the flushing valve
 Begin by placing the flush valve, which usually has one side completely open and the other half rinsed. If you want to check the water level of the water tank, use the finger to gently push on one side, and then observe the toilet flush.
When the tank has completed, press the other side and evaluate the Flush strength. Compare the differences between the two attempts. If there is no noticeable change, the problem is probably on the flushing valve and may require replacement.
 If you notice the difference between rinse and pressing the toilet lid button, you may need to adjust the two screws on the button. For this purpose:
Turn the screw stripes several times.
Replace the tank lid.
Test the button and ensure that the gap is not more than 2-3 millimeters.
Check the size of the flushing rod
 Weak flushing may occur if the flushing rod is too short and prevents the flushing valve from opening. Make sure the flushing rod is measured correctly and adjust it accordingly to allow enough water flow to be flushing.
View the flushing handle or button
 If the solid nut on the flushing handle is released or the handle itself is broken, the toilet will not rinse properly. Tighten the nut or replace the handle or button to ensure a powerful flushing.
Check the toilet ventilation system
 If you are not sure how to check the ventilation system toilet, it is best to call a professional for help.
Check to block water or siphon guidance
 Blocking on water or siphon guiding can cause a weak flushing. Make sure there are no obstacles, and if you find them, it immediately restores it properly.
Prevent future weak flushing and slow discharge
 If you want to prevent recurring problems with weak flushing and slow deletion, follow these tips:
Avoid flushing objects such as cigarette cigarettes or shampoo packets.
NEVER NEPTHING toilet paper in excess.
Always close the toilet lid after use.
Unclog the toilet regularly, ideally once a month.
Use small waste to dispose of waste.
By watching these steps, you can maintain a strong flush and prevent slow discharge in the toilet.
Conclusion
Weak flushing of the toilet and slow discharge can be frustrating, but with a few simple checks and maintenance steps you can restore your toilet performance without the need for a plumber. By securing a flushing handle or buttons, the inspection of the flushing valve, the button control, and check the blocker or the venting problems, can solve the most common problems. In addition, regular maintenance and disposal of waste can prevent these problems from repeating in the future. Follow these tips to ensure that the toilet continues to work efficiently and efficiently.